EBS ICY-30

Kabel til bruk av effektsløyfe på ulike pedaler

The EBS ICY-30 Insert Cable for use with the Billy Sheehan Signature Drive & the Stanley Clarke Signature Acoustic Preamp

Connect the 1/4" Stereo Contact of the ICY-30 to one of the Loops (Clean or Drive) on the Billy Sheehan pedals to add external effects, equalizers or on/off switches to either the Clean or the Drive channel of the Billy Sheehan pedal. The cable works for any other item that make use of a y-type insert cable too, of course. Available models: ICY-30, 30 cm

Category : Audio Cable

- Colours : Black

- Connectors : Stereo jack, 2 x jack mono

- Length (m) : 0,30 m

- Molded connectors : Yes

INSERT CABLE FOR BILLY SHEEHAN PEDALS & THE STANLEY CLARKE ACOUSTIC PREAMP Examples

Example 1: An OctaBass is connected to the Clean Loop using an ICY-30 cable that feeds the OctaBass with a clean note to track, and sending back the sub octave to the clean channel of the Billy Sheehan Drive Deluxe. That way, you can use the Drive effect on top but preserve a clean sub-octave sound in the bottom. An UniChorus is connected to the Drive Loop and will only affect the distortion, and leave the clean sound unaffected.

Example 2: If you have a pedal with True Bypass laying around at no use, you can use it as an on-off switch for the Drive on the Billy Sheehan pedal by putting it backwards in the Drive loop. Benefit? Well, you would be able to use the Billy pedal as a compressor only, until you kick in the drive again.