Markbass Nano Mark II

NOK6 460,00 inkl. mva.

Produktinfo

Unbelievable tone and power-to weight ratio!

The NANO MARK II has evolved from our Nano Mark 300 amplifier, adding many useful features. 
It keeps the same powerful sound in an ultra-compact size and same lightweight package of its 
famous predecessor (only 3.20lbs/1.45 kg). The new bi-band limiter featured on this amp responds 
faster and more dynamically to your playing, giving a more natural sound. Plus, thanks to an 
optional single footswitch you can easily have access to a scooped-mid EQ setting and quickly 
get a tight tone for slap or pick bass!

Power-to-weight ratio / ultra-portable amp

 NANO MARK II is a professional grade amp weighing only 3.20 lbs / 1.45 kg and has an unbelievable 
power-to-weight ratio with 300W from its MPT power amp in a remarkably small and lightweight package. 
This amp is perfect for bassists searching for portability without sacrificing the rich and warm tones 
unique to Markbass.

Simple design

 This amp is ideal or those who need a myriad of tone shaping on the go. Thanks to its simple and effective 
controls you can get a clear, loud, defined EQ resulting in an authentic reproduction of your bass guitar's 
sound. Scooped-mid EQ ideal for slap and pick bass tones are available using an optional single footswitch 
connected to the dedicated input on the rear panel.

Bi-band limiter

 Our new bi-band limiter responds faster and more dynamically to your playing than traditional limiters do 
and lets your high end "breathe" for a more natural sound. It makes our amp heads the best choice for anyone 
who enjoys a quick, punchy attack at high volumes.

MPT - MARK PROPRIETARY TECHNOLOGY

Many other bass amps on the market use power amps that are not specifically designed for bass. At Markbass, 
Marco De Virgiliis invested heavily in R&D to develop a proprietary power amp technology in house. When 
compared against the competition, all Markbass amps feel unique, with a more defined sound and more power. 
Our MPT power amp was built from the ground up to respect and elevate the inherent tone of your instrument.

XLR Out, Pre/Post EQ, FX send/return, Footswitch

 A balanced XLR Line Out with Pre/Post EQ and GND Lift switches, effect send and return, Footswitch input 
and quarter inch/Speakon speaker output - truly a feat of engineering - even we find it hard to believe 
all of these fit in such an ultra-small head.

INPUTS
 INPUT impedance: 1 Mohm, max. voltage: 15 Vpp
 RETURN impedance: 33 Kohm, max. voltage: 10 Vpp

CONTROLS
 GAIN –60 dB to +23 dB range
 PRE/POST EQ (for line out) switch on rear panel
 GROUND LIFT switch on rear panel
 FOOTSWITCH (not included) for flat/scooped switch
 MASTER VOLUME

EQUALIZATION
 LOW: center frequency 60 Hz; level: ±16 dB
 MID LOW: center frequency 360 Hz; level: ±16 dB
 MID HIGH: center frequency 800 Hz; level: ±16 dB
 HIGH: center frequency 5 kHz; level: ±16 dB

OUTPUTS
 SEND EFFECTS: unbalanced, max. voltage 20 Vpp (Pre Eq)
 LINE OUT balanced XLR, Maximum Voltage 10 Vpp, Impedance 600 ohm
 SPEAKER OUT: speakon/1/4” combo

DIMENSIONS AND WEIGHT
 WIDTH: 7.87 in. / 20 cm
 DEPTH: 8.27 in. / 21 cm
 HEIGHT: 2.09 in. / 5.3 cm
 WEIGHT: 3.20 lbs / 1.45 kg

OUTPUT POWER: 300W RMS @ 4 ohm, 150W RMS @ 8 ohm 

POWER REQUIREMENT: 100/120V; 230V; 240V  50/60Hz (Voltage is factory preset according to region of sale)

OTHERS
 BI-BAND LIMITER
 FOOTSWITCH (OPTIONAL): FLAT/SCOOPED-MID